Second monitor still tinted after hibernation
-
I have a second monitor (Wacom Cintiq) attached via USB-C DisplayPort and when I turn on my computer after hibernation, Flux is always still on - only on the Cintiq, not on my main laptop screen.
I just upgraded laptops and didn't have this issue before, but my old laptop was connected via regular DP since it didn't have USB-C DisplayPort support. I'm not sure if this is what's causing the issue, but using the USB-C on my current laptop saves me a lot of cables so I'd like to keep using it if possible.
-
Can you post f.lux options > driver info so we can see what the adapter is?
(USB-C connections can cause some issues, depending on the kind.)
-
This post is deleted! -
@herf Hi, sorry for the late reply.
Driver info
The information below is already on the clipboard. Paste to the f.lux forum or email us for help.NVIDIA 27.21.14.5720: NVIDIA GeForce RTX 2060 (20201102)
Intel Corporation 27.20.100.8783: Intel(R) UHD Graphics (20200924)Generic PnP Monitor, 294 x 165mm, built 2017
Chromaticities:
R=0.652344 0.339844
G=0.304688 0.622070
B=0.141602 0.083984
W=0.312500 0.328125
sRGB gamut: 93%, AdobeRGB gamut: 67%Generic PnP Monitor, 344 x 194mm, built 2019
Chromaticities:
R=0.594727 0.361328
G=0.345703 0.554688
B=0.157227 0.106445
W=0.312500 0.328125
sRGB gamut: 58%, AdobeRGB gamut: 37%Winlimit=0, 0
Monitor 1 on Intel(R) UHD Graphics: VCGT=0 gamma=1
Monitor 2 on NVIDIA GeForce RTX 2060: VCGT=0 gamma=1Windows Build: 19042.685
OK
-
@dieustryth It does look like the Cintiq is connecting directly, but usually USB-C would require some kind of adapter like "Wacom Link" or DisplayLink.
There are some slightly newer drivers available but it is more likely to be an issue with the USB connection.
https://www.nvidia.com/Download/driverResults.aspx/167753/en-us
-
@herf Thanks - I've updated the driver but I'll look into bringing back the WacomLink into my setup - it's unfortunate to have to reintroduce those extra cables but it'll probably be worth it. Thanks again!
