Screen strobes when going from daylight to sunset mode
-
Can you please look for conflicting apps? Do you use a Lenovo device for instance?
-
No Bluetooth or Lenovo devices. How else can I search for conflicting apps?
-
Please post f.lux options > driver info... that will give us a place to start!
-
This post is deleted! -
This post is deleted! -
It's also text so you can just paste.
-
Thanks...
NVIDIA 26.21.14.4223: NVIDIA GeForce GTX 960 (20200131)
Acer T232HL, 509 x 286mm, built 2017
Chromaticities:
R=0.644531 0.330078
G=0.315430 0.620117
B=0.154297 0.064453
W=0.313477 0.329102
sRGB gamut: 96%, AdobeRGB gamut: 67%Winlimit=0, 1
Monitor 1 on NVIDIA GeForce GTX 960: VCGT=0 gamma=1Windows Build: 17134.885
-
Okay, in f.lux options can you try turning on "Always use windows internal color table" to see if this helps?
17134 is EOL'd by Microsoft, so I may have missed a test case there.
-
I can't find the option "Always use windows internal color table".
-
Just as an update, sunset kicked in, and f.lux worked as it should. There was no more strobing!
-
Well, just over two hours later the strobing started again, out of the blue. Went and kept changing the color schemes a few times (8?) and settled on Recommended Colors and the strobing stopped, although the selection says Custom Colors.
-
Can you see if Windows Night Light is diabled also?
-
Thanks for the reply. It was enabled... It's now turned off so will see in 10 hours or so.
-
Well, after 2 nights all is good. It appears that having Windows Night Light enabled caused the problem. Since disabling this option, all f.lux works as it should. Thanks for the help.
