Flux not working in Dual monitor setup with Fresco Logic USB3.0 display adpter



  • Hi Support,

    The monitor connected with Fresco Logic USB3.0 display adpter isn't orking with Flux.
    Below are the driver details.

    Is it possible to fix it?

    Fresco Logic 2.1.34054.0: Fresco Logic IDDCX Adapter (20171113)
    Intel Corporation 10.18.10.4358: Intel(R) HD Graphics 4000 (20151221)

    Generic PnP Monitor, 527 x 296mm, built 2019
    Chromaticities:
    R=0.657227 0.330078
    G=0.317383 0.610352
    B=0.146484 0.063477
    W=0.313477 0.329102
    sRGB gamut: 96%, AdobeRGB gamut: 66%

    Generic PnP Monitor, 527 x 296mm, built 2019
    Chromaticities:
    R=0.657227 0.330078
    G=0.317383 0.610352
    B=0.146484 0.063477
    W=0.313477 0.329102
    sRGB gamut: 96%, AdobeRGB gamut: 66%

    Monitor 1 on Intel(R) HD Graphics 4000: VCGT=0 gamma=1
    Monitor 2 on Fresco Logic IDDCX Adapter: VCGT=0 gamma=1

    Windows Build: 18363.752

    62d25daf-1568-4589-b0d0-fb659519475a-image.png


Log in to reply