I highly recommend using nothing but pure red light if possible.
-
That's not the measurement I took here - sorry I intended to post some things Monday but got busy with other stuff! I'll post a screencap or the info later. (I have to wait for it to get dark to get accurate measurements at my desk ha!)
-
Well, I'm sure the NOAA is pretty good at that stuff, it's close enough for me, thanks for adding it anyway!
-
@timpster said:
Hey I found new data in the fluxometer. Your light is listed under "NOAA LED" TCP Red
https://fluxometer.com/rainbow/#!id=NGDC LED/TCP Red 1WI may pick up the amber version but the red is lower so I'm not a fan of that.
No, mine is made by Westinghouse, as I said several times now. I don't know how they compare, so I'm not going to go by that.
-
only red light ? isnt that creepy ? :D
-
@Iver said:
only red light ? isnt that creepy ? :D
Not at all, surprisingly. I find it to be very soothing and when it's time to lay down and go to sleep, I sometimes find that I don't want to turn my red FEIT LED lights off. :) I also find that if my eyes are tired and my eyelids are also oily, sitting in pure red light makes my eyes stop feeling tired and I almost don't notice the oiliness of my eyelids at all. If I were to expose my eyes to bright white bluish light, then I'd definitely feel discomfort in my eyes.
Take now, for example. It's just after 5pm and I've been awake for just over 34 hours (I've been trying to wait until sunset). Right now it's bright and sunny out but I have decided to give up waiting for sunset and begin getting ready for bed. So, I closed my room-darkening blinds to block as much of the sunlight as possible (they don't do a GREAT job though, but it's enough). Then I swapped out both of my Switch 3-Way lights for my FEIT red LEDs.
Of course, after that I also changed my f.lux location to somewhere where the sun has set already so that I could choose a color temperature that's warmer than 2700K. I chose 1200K and I pressed Alt+Page Down just once because otherwise everything is kind of washed out. Alt+Page Down just once brings everything back to normal for me. Plus, it's even warmer at 1187K vs. 1200K. I also always go into my monitor's color control for red green and blue and I take green and blue all the way down to 0 while leaving red at 50 (100 is the max). I also reduce my monitor's brightness to almost 0.
Prior to doing this, my eyes were beginning to be unbearably uncomfortable. My eyelids are oily, I've been awake for over 34 hours, and so all I wanted to do is close my eyes! However, I'm also in the middle of digesting food! I can't win. :) I was planning to wait until sunset before going to bed, so I'm gonna have to sit in this red light for a little longer than normal - but I'm fine with that because I love it.
So pure red light is almost like not having any lights on, yet I can still see everything. It's great!
-
@Iver said:
only red light ? isnt that creepy ? :D
You may prefer the more inviting amber (orange) lights, but red is really nice, I've got some that do red, and it's just awesome for brushing my teeth and such!
-
Hi,
I'm having flashbacks to the 60's and early 70's :)
I operated my photo darkroom in my childhood bedroom, so it was light tight (which takes a bit of getting used to).
(I did find my self memorizing step patterns, which I learned from a blind friend)Red lights were used as the 'safe light' for many stages of the photo process, film development, printing/enlargement, print development, fix and rinse.
I adopted them as the primary light I could switch on and see what I needed to (outside of photo use).
Looking forward to installing f.lux after I upgrade my machine to see how it works dynamically. Would love to not have blue light blaring at me before bed :)
-
Let us know what you think of Darkroom mode!
-
@Chuck-Jones said:
Hi,
I'm having flashbacks to the 60's and early 70's :)
I operated my photo darkroom in my childhood bedroom, so it was light tight (which takes a bit of getting used to).
(I did find my self memorizing step patterns, which I learned from a blind friend)Red lights were used as the 'safe light' for many stages of the photo process, film development, printing/enlargement, print development, fix and rinse.
I adopted them as the primary light I could switch on and see what I needed to (outside of photo use).
Looking forward to installing f.lux after I upgrade my machine to see how it works dynamically. Would love to not have blue light blaring at me before bed :)
In addition to letting the f.lux team know what you think of Darkroom Mode, let me know if you decide to get FEIT's red LEDs! I would love to make a positive difference like that. I really enjoy sitting here with nothing but my red LEDs on and f.lux set to 1200K (well, 1187K because I press Page Down once because my monitor seems to display 1200K as a bit washed out). I also adjust my monitor's color settings: I reduce Green and Blue all the way to 0 while leaving Red at 50. I also dim my monitor's brightness almost all the way down to 0, or sometimes I do go all the way down to 0 if I feel like it.
I still have to be careful with the brightness of red light though because the contraction of the pupils is alerting.
-
@TwoCables you can probably get into the secret menu on your monitor to tweak the color levels of the default color presets.
Maybe just use the default and then switch to user mode with just red.
-
@timpster said:
@TwoCables you can probably get into the secret menu on your monitor to tweak the color levels of the default color presets.
Maybe just use the default and then switch to user mode with just red.
Um, " I also adjust my monitor's color settings: I reduce Green and Blue all the way to 0 while leaving Red at 50."
-
Yeah, and you could just use "normal" color preset, then just switch it to "custom" instead of changing it every night as it seems you do now.
-
@timpster said:
Yeah, and you could just use "normal" color preset, then just switch it to "custom" instead of changing it every night as it seems you do now.
Yeah, I'm doing that. I've actually been doing that since the beginning of this now. I'm pretty smart, you know even though I probably don't seem so over the internet.
-
O.K., good, you made it seem like you changed it every day / night, good stuff.
-
@timpster said:
O.K., good, you made it seem like you changed it every day / night, good stuff.
I was just trying to be clear for Chuck-Jones while stating it as simply as possible.
