f.lux f.lux forum
    • Recent
    • Popular
    • Register
    • Login

    bug: f.lux does not remove the orange tint from screens that was inactive when entering sleep mode

    Windows v4
    1
    1
    171
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      lathans
      last edited by

      Hi!

      Issue: Screen remains tinted orange in daytime after waking computer from sleep if the screen was tinted and disconnected/set inactive before entering sleep mode.

      Setup: PC with two displays connected. In my case, one computer monitor and one TV. Just one active display at the time ("PC screen only" or "second screen only").

      To replicate the issue:

      1. Use the computer in the evening with the orange tint from f.lux
      2. Change active display to a second monitor (turning on my TV in my case)
      3. Set Windows to sleep
      4. Disconnect the second monitor (turning off the TV in my case)
      5. Wake the computer the next day
      6. The first display that I used in step 1 is still tinted orange
      7. Nothing seems to remove the orange tint other than closing f.lux and opening f.lux again. Closing f.lux and then launching it again solves the problem.

      Doing it the other way around also make the issue appear on the other display: Using the TV in the evening with orange tint, turning off the TV, using the computer monitor, let Windows go to sleep, waking up in the daytime, turning on the TV and waking the PC, and the TV remains tinted orange until I exit and start f.lux again.

      I guess f.lux should check if the time has changed from night time to daytime when Windows wakes from sleep and clear the orange tint from the monitor even if the active display is different from which display that was active the moment before Windows went to sleep.

      Let me know if you need more information. Thanks!

      Driver info follows below:

      Virtual Desktop, Inc. 13.50.53.699: Virtual Desktop Monitor (20240521)
      Meta Inc. 17.12.55.198: Meta Virtual Monitor (20230328)
      NVIDIA 32.0.15.6109: NVIDIA GeForce RTX 4090 (20240905)
      
      Generic PnP Monitor, 598 x 336mm, built 2014
      Chromaticities: 
        R=0.645508 0.343750
        G=0.315430 0.625000
        B=0.139648 0.044922
        W=0.312500 0.329102
        sRGB gamut: 91%, AdobeRGB gamut: 64%
      
      Generic PnP Monitor, 698 x 393mm, built 2021
      Chromaticities: 
        R=0.650391 0.335938
        G=0.318359 0.603516
        B=0.148438 0.054688
        W=0.313477 0.329102
        sRGB gamut: 87%, AdobeRGB gamut: 60%
      
      Unlimited gamma ramp=1, Internal ramp=0
      Monitor 1 on NVIDIA GeForce RTX 4090
        Has VCGT profile=0, Gamma Ramp works=1
      
      Windows Build: 22631.4317
      
      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright © 2014 NodeBB Forums | Contributors