f.lux beta (another thread)
-
Before I update everyone, look at 4.22?
https://justgetflux.com/flux-setup4-22.exe
This one is all about color - we are trying to dial in better color calibrations even when Windows doesn't have one. Basically a lot of our laptops were too "green/yellow" and we tried to fix it using some embedded monitor info.
Also trying to fix tone map so things look better when you dim a lot at night - looks amazing when it works.
Color stuff may be buggy, so let me know! Options has "Use Monitor Data for Calibration" which you can turn off.
-
@herf Well....colors are more darker indeed :D can you explain what "Use Monitor Data for Calibration" means? I see little difference when I turn it off.
-
@sitayi2308 Well most monitors have a built-in record of their chromaticities (the exact colors that RGB are).
It used to be, this wasn't a good place to look for information, but with the half-dozen machines around here, we found awful color profiles but perfect embedded panel profiles. So we turned this on, and for some of our machines it is dialing in perfect colors.
"dUV" is "distance from the planckian locus", or how far a thing is off the blackbody curve. So we had one particular laptop that was dialing in +0.016 dUV (way into the green/yellow area), and now it is around -0.001. So you would call it a beautiful warm glow, rather than puke yellow!
-
indeed darker color, Halogen turned Incandescent (Benq xl2730z)
my feedback:
-
can you please add an option for disable the Notifications on hotkeys actions? (alt page down, etc) In Overwatch when i change brightness the notification makes the game minimize and send me to desktop
-
If i'm seeing it right each step on brightness is 7%, can it be a option to set how much % we want to each step ? I prefer small steps (on of the good things that SunsetScreen has) because this monitor brightness is weird (too dark or burn your eyes)
thanks for the work !
-
-
Whoa. I think Alt+Page Down dimming looks much better. I mean, correct me if I'm wrong, but I think that previously dimming resulted in a severe gamma shift effect whereas now it's much more even from the top to the bottom of my monitor.
I've been meaning to say that I think it would be great if f.lux could remember my last Alt+Page Down dimming setting. That way, if I restart my computer or exit f.lux and then relaunch it, it will go right back to where I had it. I always dim 1 or 2 increments when I go to an extremely warm red color like 800K because dimming with Alt+Page Down restores proper contrast at these extremely red colors with my preferred NVIDIA Control Panel "Digital Vibrance" setting. Obviously I could just stop using Digital Vibrance when I go to a very warm color like 800K, but it takes far more time than just pressing Alt+Page Down and the result is the same.
I'd even say the Alt+Page Down dimming should never be undone unless the user chooses to do so, even if the computer is restarted (or if f.lux is closed and relaunched). So, I would even go as far as saying the dimming setting should always remain until the user restores the brightness with Alt+Page Up. After all, there is a "Return to Full Brightness" menu item now. Right now, the dimming is undone way too easily. It happens when I disable f.lux too.
I think it would be nice too if we had the ability to dim from the f.lux menu or the window too. I think it would need to be a slider. Or, at least arrow buttons to click. Or, maybe just a drop-down menu of the different dimming levels. Or a sub-menu. Or both. Or all of these.
I noticed too that Darkroom Mode gets disabled if I Alt+Page Up at all while in Darkroom Mode regardless of where my dimming is currently set. I don't know how long it has been like this though; this is the first time I think I've pressed Alt+Page Up while in Darkroom Mode. I would say that this isn't desirable. Of course, I could look at it as an easy way to disable Darkroom Mode. heh :)
All transitions are now only super choppy if the f.lux window isn't open. So, all transitions are very close to being butter-smooth when the f.lux window is open, but once it closes (or if I close it), they become a slide-show every time I have a transition.
I think the transition speed when launching f.lux to the set color temperature (like 800K for me) should be much faster. The transition speed for disabling and re-enabling is wonderfully fast, so I'd like it if the transition on the launch of f.lux (or when restarting the computer) could be that fast or faster.
I think a restart is required after upgrading to 4.22. Before I restarted my computer, I was able to break the "Disable for [program]" feature by doing this:
- Enable "Disable for [program]" (in this example, I am using Firefox)
- Switch to Firefox to disable f.lux
- Open the f.lux window (f.lux remains disabled at this point)
- Go into the f.lux menu using the f.lux window and turn off the "Disable for [program]" feature
When doing this, f.lux would get stuck at 6500K because it was still disabled for that program while I turned the feature off. After that, the feature no longer worked, even if I closed all programs and exited f.lux and reopened everything. Apparently, I had to restart my computer to fix it because I can't break it anymore no matter how hard I try.
Before restarting my computer, I was able to Alt+Page Up in Darkroom Mode without disabling Darkroom Mode. Now it disables it.
I don't know how to reliably reproduce this next bug, but sometimes the percentage of daylight will read 0% when I choose 1200K, and sometimes it will read 1%. Sometimes it seems to depend on how I chose the previous color temperature, whether that's via the menu or via the slider. Sometimes it seems to depend on whether I had 6500K selected prior to choosing 1200K, sometimes it doesn't. It's strange. If it reads 1% at 1200K, I can get it to go to 0% and stay there by Alt+Page Down dimming, and then Alt+Page Up to restore the brightness. Note: I am using the Very Fast transition speed, if it makes any difference.
-
So to add, I think a restart should be required for this update. Version 4.22 is working noticeably better for me after restarting my computer. When I installed 4.22, I still had 4.21 installed - but it wasn't running of course. I always exit f.lux first. So, it's not like I had a fresh installation of 4.22.
-
@TwoCables So far the only difference is more yellowish in all settings, so i presume thats the correct color when "Use Monitor Data for Calibration" its activated.
-
@sitayi2308 said in f.lux beta (another thread for 4.21):
@TwoCables So far the only difference is more yellowish in all settings, so i presume thats the correct color when "Use Monitor Data for Calibration" its activated.
I have no idea. That setting isn't changing anything for me.
-
@TwoCables we turn it off internally when the monitor doesn't give good data or just reports sRGB. Probably should hide the checkbox then too.
-
@TwoCables whether it says 1% or 0% is probably due to dimming - it should not care how you got there. And we aren't confident about these numbers to this level yet anyway!
-
@herf said in f.lux beta (another thread for 4.21):
@TwoCables whether it says 1% or 0% is probably due to dimming - it should not care how you got there. And we aren't confident about these numbers to this level yet anyway!
It's not due to dimming.
-
@lorna Bringing up the f.lux right-click menu while the program is launched doesn't show any disable options after the program has already been disabled.
Though, on a separate note, I'd also like to see more options for how f.lux handles disabling-by-program. Currently, f.lux re-dims the color temperature as soon as the program window in question loses focus. Meaning that clicking in/out of the window frequently results in lots of temperature shifting. Either an option for "disable f.lux for out-of-focus programs" or a time-out period for f.lux's re-enabling (e.g. f.lux will wait 5 minutes after losing sight of the program before turning back on) would be great to see.
-
@SomeGuyNamedDavid said in f.lux beta (another thread for 4.21):
@lorna Bringing up the f.lux right-click menu while the program is launched doesn't show any disable options after the program has already been disabled.
Though, on a separate note, I'd also like to see more options for how f.lux handles disabling-by-program. Currently, f.lux re-dims the color temperature as soon as the program window in question loses focus. Meaning that clicking in/out of the window frequently results in lots of temperature shifting. Either an option for "disable f.lux for out-of-focus programs" or a time-out period for f.lux's re-enabling (e.g. f.lux will wait 5 minutes after losing sight of the program before turning back on) would be great to see.
To put the disabled program back in the list, put it in focus and then open the f.lux menu or window. Then you can undo the disabling.
-
@TwoCables Alright, that worked, thanks. (Extremely prompt response, too!) There were difficulties in doing so because the window in question was in bordered fullscreen, meaning that the only way to get f.lux to see it was to open the f.lux window, click into the program in question, and tab back into the f.lux window before it closes. However, strangely, this method only works sometimes, rather than all of the time, so I may have to attempt it several times before the program in question will appear in f.lux's menu.
Also strangely, the program in question appears in f.lux's menu twice when it does appear. Clicking the first one places/removes checkmarks on both, while clicking the second one does nothing.
In the future, it might be better to have disable-able programs persist in f.lux's menu for a minute or so after they've been in focus, or to show the last few most recently in-focus programs in said menu, to prevent possible issues like these.
-
After what Lorna said in the post below, it sounds like they do have plans to make it far better.
https://forum.justgetflux.com/post/13405
"No master list yet."
-
Yes this is still a work in progress. We held off on the feature in v3 because we didn't like the timing, which still needs improvement.
I think we did a little better with the timing on Mac, where disable is very fast, but re-enable is very slow. The case for me is: working in Photoshop (disabled), alt-tab to a chat client (enable slowly), go back to Photoshop. Fast adjustments back and forth are not very good here.
-
@herf Alright, sounds great, will be looking forward to it. Keep up the good work, been loving much of the new beta changes so far.
-
@SomeGuyNamedDavid Not while it's launched, while it's active. Thanks @TwoCables for making that more clear.
@lorna
-
@lorna said in f.lux beta (another thread for 4.21):
@SomeGuyNamedDavid Not while it's launched, while it's active. Thanks @TwoCables for making that more clear.
You're welcome, Lorna.
-
4.21 on my Laptop (Windows 10) the location is incorrectly showing Europe Asia even though the LAT/LON it's showing is actually the North of England.
I know we're going through Brexit and everything but I don't recall England becoming part of Asia ;-)
