Hue Integration Broken

Nathan 0

Hello,

A few weeks ago I noticed that Hue Integration was broken, and f.lux was no longer controlling my Hue lights.

I simply disconnect from the Hue system and went on vacation.

I'm now back and trying to get the Hue integration working. I followed the recent Hue thread and tried downgrading to 4.120 as well as upgrading to 4.125 and disabling the "Backoff when Hue changes" checkbox.

Nothing I've tried has re-enabled Hue lighting control. F.lux currently has no effect on the Hue lights whatsoever.

My set-up is Windows 11 with my build pasted below. I noticed this behavior change around the time of 4.124 release, and did have automatic f.lux updates enabled, so I presume that was the catalyst.

Hopefully I am missing something simple, any support apprectiated.

Thanks,
Nathan

Advanced Micro Devices, Inc. 31.0.14001.45012: AMD Radeon RX 6700 XT (20230210)

Generic PnP Monitor, 376 x 301mm, built 2017
Chromaticities:
R=0.640625 0.334961
G=0.297852 0.608398
B=0.147461 0.070313
W=0.313477 0.329102
sRGB gamut: 100%, AdobeRGB gamut: 68%

Unlimited gamma ramp=1, Internal ramp=0
Monitor 1 on AMD Radeon RX 6700 XT
Has VCGT profile=0, Gamma Ramp works=1
Monitor 2 on AMD Radeon RX 6700 XT
Has VCGT profile=0, Gamma Ramp works=1
Monitor 3 on AMD Radeon RX 6700 XT
Has VCGT profile=0, Gamma Ramp works=1

Windows Build: 22000.2176

Nathan 0

Solved with a Power Cycle to the Hue Bridge and a repairing.

I had previously re-paired with the bridge, but had not power cycled the hue bridge itself. Doing both seems to have been needed.